'enable' Requires 200mg Caffeine
Here’s a quick refresher on why it’s a good idea to stay away from enable mode on routers before you’ve had a couple cups of coffee:
drvr-wifi#show flash System flash directory: File Length Name 1 4707392 cxxxx-bnt-3mz.122-5f.bin [4707456 bytes used, 3681152 available, 8388608 total] 8192K bytes of processor board System flash (Read/Write) drvr-wifi#delete cxxxx-bnt-3mz.122-5f.bin Delete filename [cxxxx-bnt-3mz.122-5f.bin]? Delete flash:cxxxx-bnt-3mz.122-5f.bin? [confirm] drvr-wifi#copy tftp://10.254.1.5/cxxxx-bnt-3mz.122-5f.bin flash:cxxxx-bnt-3mz.122-5f.bin Destination filename [cxxxx-bnt-3mz.122-5f.bin]? Loading cxxxx-bnt-3mz.122-5f.bin from 10.254.1.5 (via FastEthernet0): ! %Error copying tftp://10.254.1.5/cxxxx-bnt-3mz.122-5f.bin (Not enough space on device) drvr-wifi#reload Proceed with reload? [confirm] System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C1700 platform with 32768 Kbytes of main memory boot: cannot determine first file name on device "flash:"
For those of you not familiar with Cisco routers, what I inadvertently did was delete the firmware on the router, try to copy a new firmware to it, and missed the ‘Not enough space’ error that popped up. Upon reboot, the router couldn’t boot anymore and I was dropped to a rommon prompt.
For anyone else who might run into this, there is a handy guide on reflashing IOS from rommon and TFTP available at the Cisco Blog.